How to Connect iPhone to Bose Wave Radio: Effortlessly Enjoy Your Music!

In today’s era of advanced automotive technology, the process of enjoying music while on the move has become incredibly convenient. Gone are the days of lugging around physical CDs or DVDs. With smartphones and cutting-edge audio systems like the Bose Wave radio, accessing and playing music has become easier.

So, how to connect iPhone to Bose Wave music radio?

You can connect your iPhone to a Bose Wave radio using a 3.5mm cable, Bluetooth, or an aux cable. For the 3.5mm cable method, plug one end into the auxiliary input port on the radio and the other end into your iPhone using a converter. For Bluetooth, enable it on both devices and pair them. The aux cable method is similar to the 3.5mm cable.

This is just the tip of the iceberg, I’ll dig deep into it in the subsequent segments.

How to Connect iPhone to Bose Wave Radio?

You can connect the iPhone to Bose Wave radio in three different methods for that, such as: using a 3.5mm audio cable, Bluetooth, and aux. You can do this according to your preference. 

Connecting iPhone to Bose Wave Using a 3.5mm Cable

To connect your iPhone to a Bose Wave using a 3.5mm cable, you will need the following tools:

  • 3.5mm Audio Cable: Get a 3.5mm audio cable, commonly known as a headphone cable. It should have a 3.5mm plug on both ends.
  • iPhone USB port to 3.5mm jack converter

Now, let’s go through the step-by-step process:

Step 1: Locate the Auxiliary Input

Identify the auxiliary input port on your Bose Wave Music System. It is usually located at the back or on the side of the device. It may be labeled as “AUX,” “AUX IN,” or with a headphone symbol.

Step 2: Plug in the 3.5mm Cable

Take one end of the 3.5mm audio cable and plug it into the auxiliary input port of the Bose Wave Music System. Ensure it is securely connected.

Step 3: Connect the Cable to Your iPhone

Plug the jack converter into your iPhone USB port.  And then take the other end of the 3.5mm audio cable and plug it into the headphone jack of the converter. Make sure it is inserted firmly.

Step 4: Adjust the Volume

Turn on your Bose Wave Music System and select the auxiliary input as the audio source. Start playing audio on your iPhone, such as music or a podcast. Adjust the volume on both the iPhone and the Bose Wave Music System to your desired level.

With this, you’re done with connecting your iPhone to the Bose wave radio using a 3.5mm audio cable.

ZIOCOM 30 Pin Bluetooth Adapter Receiver for Bose iPod iPhone SoundDock and Other 30 pin Dock Speakers with 3.5mm Aux Cable

Connecting iPhone to Bose Wave Via Bluetooth

To connect your iPhone to the Bose Wave Radio via Bluetooth, follow these steps:

Step 1: Turn on your Bose Wave Radio and set it to Bluetooth mode by pressing the “Bluetooth” button on the remote control or using the control panel on the radio.

Step 2: Press and hold the Bluetooth button on the remote control for a few seconds until the Bluetooth indicator on the radio starts flashing.

Step 3: On your iPhone, go to Settings, and turn on Bluetooth.

Step 4: Your iPhone will begin searching for available Bluetooth devices. Look for “Bose Wave” or “Wave Music System” in the list of devices and tap on it to establish a connection.

Step 5: If prompted, enter the passcode “0000” to pair your iPhone with the Bose Wave Radio.

Once the pairing process is complete, your iPhone is now connected to the Bose Wave Radio. You can play music from your iPhone, and the audio will be transmitted through the speakers of the Bose Wave Radio.

By following these simple steps, you can easily connect your iPhone to a Bose Wave Radio via Bluetooth and enjoy your favorite music wirelessly.

The last method is to connect iPhone to the Bose Wave radio using an aux cable. The Aux cable and the 3.5mm cable are technically the same. For this reason, the procedure to use this cable is similar to the 3.5mm cable.

Bose Wave Bluetooth Music Adapter

Frequently Asked Questions (FAQs):

Why Is My Bose Wave Not Connecting?

Your Bose Wave may not be connecting due to a memory issue. Clearing the device memory of previously-connected Bluetooth® devices can help resolve this problem. By doing so, you can ensure that the Bose product isn’t trying to reconnect to incompatible or unavailable devices. After clearing the memory, attempt to reconnect your device and see if the issue persists.

How Old Is Bose Wave Radio?

The Bose Wave Radio is 28 years old. It was launched in 1993 as a compact AM/FM clock radio. It had two small 2.5-inch speakers. In 1998, Bose introduced the Wave Radio/CD, which was basically a Wave Radio I with a CD player.

How to Pair Bose Soundlink Speakers?

To pair Bose Soundlink speakers, turn on both speakers and press and hold the Bluetooth button on one speaker. Then, go to your device’s Bluetooth settings, find the speaker’s name, and tap on it. Enter the pairing code if prompted. Repeat the process for the second speaker. Once both speakers are paired, you can play audio through them simultaneously. Refer to the user manual for model-specific instructions.


Well, this is all about how to connect iPhone to Bose Wave radio. As long as you follow the instructions in this article, it will be easy for you to do it correctly. You shouldn’t face any issues if your system is okay internally. If you suspect your system has internal issues, it’s recommended to consult an expert. 

Enjoy your day with beautiful music!

You May Also Like:


Enjoy this blog? Please spread the word :)

Scroll to Top